The Belkin router is a Wi-Fi router which serves you on two levels. Its basic functions includes allowing network connectivity to your internals hosts via Wi-Fi and external Internet via a WAN link Ethernet, PPPoE or DSL. This way your entire space gets very fast and intermittent internet connection with a long range connectivity. This is the reason many people have shifted to Belkin wireless router as compared to other sources of internet connection.
Now, if you have got one for your space you will need to setup the Belkin router and for that you should read this guide below about How to Setup Belkin Router in easy steps:
The complete setup process is done through the Belkin router in-built web-based setup pages. For that you will have to configure, modify settings and set up advanced properties as your convenience which you can save for future use.
Now, you can either setup Belkin router with the Belkin setup disk supplied with your router or using the manual setup method.
The first way is through the default IP address which is 192.168.2.1. You can use this for the outside connection which is used for local networking, and the home network administrator controls it.
Now, you need to provide internet connection to your Belkin wireless router. For that you can connect the modem to your Belkin router with a cable either internet or Ethernet cable.
Select any one of the LAN port on the back of the router and plug the other end of the cable to the computer. There are 4 LAN ports on the back your Belkin router choose any one of them.
The modem cable must be connected to the Belkin wireless router through “WAN” port. This port will either be in Yellow or Green color.
First turn ON your modem and then wait for 1 minute until the modem lights gets steady. Once that is done Connect power cord to your router and turn it on.
Now this is when Belkin N wireless router is ready for WiFi, you can try connecting your laptop and other wireless devices to the Belkin router